Filter
Top Products
PERFORMANCE Possible Causes What To Do
Clothes too wet Incorrect spin speed • Make sure the spin cycle selected matches the load you
selected are washing. Some fabrics will feel wetter when rinsed
with cold water.
Colored spots Incorrect use of fabric • Check fabric softener package for instructions and follow
softener directions for using dispenser.
• Pretreat stain and rewash.
Dye transfer • Sort whites or lightly colored items from dark colors.
Grayed or yellowed Not enough detergent • Use more detergent (especially with larger loads).
clothes Be sure to follow detergent manufacturer’s directions.
Hard water • Use a water conditioner like Calgon brand or install
a water softener.
Water is not hot enough • Make sure water heater is delivering water at
120°F–140°F (48°C–60°C).
Washer is overloaded • Select load size to match clothes load.
Detergent is not • Add detergent as wash basket fills with water before
dissolving you load clothes.
Dye transfer • Sort clothes by color. If fabric label states wash separately,
unstable dyes may be indicated.
Lint or residue on Clothes are air or line dried • If you do not dry your clothes with a clothes dryer, your
clothes clothes may retain more lint.
Incorrect sorting • Separate lint producers from lint collectors.
Washing too long • Wash small loads for a shorter time than larger loads.
Detergent not dissolving • Add detergent as wash basket fills with water, before you
load clothes.
• Try a liquid detergent.
• Use warmer water temperature.
Overloading • Load clothes no higher than the top row of holes in the
washer basket.
• Make sure load size selected matches clothes load size.
Incorrect use of fabric softener • Check fabric softener package for instructions and follow
directions for using dispenser.
Before you call for service… ge.com
Consumer Support
Troubleshooting TipsOperating Instructions
Safety Instructions
Troubleshooting Tips
Save time and money! Review the charts on the following pages,
or visit www.GEAppliances.com. You may not need to call for service.
15
PERFECTEMP PLUS Possible Causes What To Do
PerfecTemp Plus wash The washer is in a cold • This is normal. The PerfecTemp Plus feature is designed
temperature is incorrect
rinse cycle not to activate during a cold rinse cycle to improve the
energy efficiency of your washer.
(Review PerfecTemp
All the water in the household • Wait until the water in the water heater is heated to the
Plus
in the About washer
water heater has been used correct temperature.
features section)