Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips
About Clothes Care Cycles.
8
PRESOAK
To presoak a load and go straight into a wash cycle:
Select your wash cycle, press the PRESOAK pad, then press the START pad.
■ Starts with three minutes of agitation, then 12 minutes of soaking, followed by the
selected wash cycle.
■ Uses the speed and water temperature of your selected wash cycle.
To presoak a load without going straight into a wash cycle:
Press the PRESOAK pad. The washer will fill. You may change the automatic settings
if desired.
■ Three minutes of agitation is followed by up to 24 hours of soaking.
■ To soak less than 24 hours, press the DRAIN & SPIN pad or choose a wash cycle.
QUICK RINSE (on some models)
Use this feature to quickly rinse chlorine, perspiration, stains, etc. out of clothes.
■ The washer fills with water, agitates for three minutes, drains and spins. You may
change the automatic settings if desired.
HANG DRY (on some models)
If you air dry your clothes without the aid of a dryer, you may find that the slower final
spin speed of the Hang Dry setting produces fewer wrinkles in your clothing. This may
significantly reduce your ironing chore.
STAIN WASH (on some models)
For heavily soiled or stained items. Adds an extra agitation and soak at the beginning
of the wash cycle.
Appearance may vary