Filter
Top Products
Installation
Washer
Instructions
If you have any questions, call 800.GE.CARES (800.432.2737)
or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344
or visit www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT – Save these instructions
for local inspector’s use.
•
IMPORTANT – Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time – 1-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
WARNING
• This appliance must be properly grounded and
installed as described in these Installation Instructions.
• Do not install or store appliance in an area where
it will be exposed to water/weather. See Location
of Your Washer section.
• NOTE: This appliance must be properly
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
FOR YOUR SAFETY:
16
TOOLS REQUIRED FOR
WASHER INSTALLATION
❏ 1/4″ nut driver
❏ 3/8″ socket with ratchet
❏ 3/8″ open-end wrench
❏ Adjustable wrench or 7/16″ socket with ratchet
❏ Adjustable wrench or 9/16″ open-end wrench
❏ Channel-lock adjustable pliers
❏ Carpenter’s level
❏ Water Hoses (2)
PARTS SUPPLIED
❏ Cable Tie
❏ Hose Guide
WPDH8850, WPDH8910, WPDH8900