Filter
Top Products
#()!!' ))$'.'
Align the holes in the left bracket with the holes
in the bottom left corner of the dryer. Use a
Phillips screwdriver to install the 2 #12 x 1″
tapping screws.
Repeat the above step with the right bracket
on the bottom right corner of the dryer.
Set the dryer upright.
#$) Make sure to set the dryer on a piece of
packing material so the brackets that are attached
to the bottom of the dryer do not damage the floor.
#()!!'.'#' )
$#,('
Lift the dryer on top of the washer. Be careful
not to scratch the top of the washer with the
brackets. Protect the washer control panel with
cardboard or other protection. Be sure to lift
the dryer high enough to clear the washer
control panel.
,'## M %>C4=C80;
%4AB>=0;=9DAH">A4C70=CF>?4>?;40A4
A42><<4=343C>;85CC743AH4A8=C>?>B8C8>=
1420DB4>58CBF4867C0=3B8I408;DA4C>3>
B>2>D;3A4BD;C8=?4AB>=0;8=9DAH>A340C7
Align the holes in the bracket with the holes
in the back of the washer. Using a Phillips
screwdriver, attach the 2 #8 x 1/2″ tapping
screws. Repeat on both sides of the washer
.
#!/)#()!!)$#
Refer to the washer Installation Instructions
to complete the washer installation.
Refer to the dryer Installation Instructions
to complete the dryer installation.
Carefully slide or walk the stacked washer and
dryer into place. Use felt pads or other sliding
device to assist moving and to protect flooring.
,'##M%>C4=C80;%4AB>=0;
=9DAH>=>C?DB7>=C743AH4A>=248=BC0;;43
C>C>?>5C74F0B74A%DB78=6>=C743AH4A<0H
A4BD;C8=?8=274358=64AB
Place
hands
here
Place
hands
here
=BC0;;0C8>==BCAD2C8>=B