Filter
Top Products
STEP-BY-STEP INSTRUCTIONS (cont.)
Reinstall Nuts and Hinge Cover
14. Place the door on its edge. Assemble the 2 machine screws (#8), washers
and nuts. Tighten using a wrench and screwdriver.
15. Place the hinge cover in position. Align the hinge cover holes with the holes
in the door.
16.Secure the hinge cover with the 2 tapping screws (#8).
Reassemble Door Assembly
IMPORTANT: Make sure there is no dirt or any other foreign material in between
the window panes.
17.Place the plastic cover onto the inner door and lock in place with the 4 tabs.
18.Place the outer door onto the inner door.
Outer
Door
Inner
Door
Top of Door
15
Reversing the door swing.
Operating InstructionsSafety Instructions Consumer SupportTroubleshooting Tips