Filter
Top Products
10
Operating Instructions Safety Instructions
Consumer Support
Troubleshooting Tips
The Agitator Cap or Fabric Softener Dispenser
The agitator cap
fits into the top of the
agitator. If it accidentally comes off,
simply put it back on.
The fabric softener dispenser
automatically
releases liquid fabric softener at the
proper time during the cycle.
Do not stop the washer during the first spin.
This will cause the dispenser to empty
too soon.
To use, follow these steps:
Make sure dispenser is securely
attached to agitator.
Use only liquid fabric softener.
Pour into dispenser, using amount
recommended on package.
Never pour fabric softener directly on
clothes. It may stain them.
Add water to dispenser until it
reaches the maximum fill line.
3
2
1
Do not pour anything into the
agitator if the agitator cap or
dispenser is removed.
Cleaning the Fabric Softener Dispenser
Remove the dispenser from the top
of the agitator.
Separate the dispenser cup from the
cover by grasping the top and pushing
down on the inside of the cup with
your fingers. Dispenser cup will pop
free from the cover.
To clean the dispenser, soak both
the dispenser cup and the dispenser
cover in the following solution:
■
1 US gallon (3.8 liters) warm water
■
1/4 cup (60 ml) heavy duty liquid
detergent
■
1 cup (240 ml) bleach
If necessary, loosen build-up with a
clean, soft cloth after soaking. Do not
use a stiff brush; you may roughen the
surface of the dispenser.
Rinse and reassemble dispenser.
Place dispenser back on the agitator.
5
4
3
2
1
Separate for cleaning.
About washer features.