Filter
Top Products
Tools Needed:
• Standard # 2 Phillips screwdriver
• Tape-tipped putty knife
• Needle-nosedpliers
1 Open the door and remove the
filler plugs opposite file hinges.
2 With the door completely open,
remove the bottom screw from
each hinge on the dryer face.
6 Rotate _he door 180 °. Insert it
on the opposite side of the open-
ing by moving the door IN and
DOWN until the top hinge and
the bottom hinge are resting on
the top screws inserted in step 3.
/
3 Insert these screws about halfway
into tile TOP holes, for each hinge,
on the opposite side. (_,%qaereyou
removed the filler plugs.) Apply
firm pressure to get the screw
started in untapped holes.
4 Loosen the top screw fiom each
hinge on the dryer face halfwa?.
5 With one hand holding tile tOF.,
of the door and the other hand
holding the bottom, remove the
door from the dr_,er by lifting it
UP and OUT.
7 Remove the remaining screws
from the side of the opening
from which tile door was
removed. With these screws
secure e.ach hinge at the bottom.
8 Tighten the two top screws of
each hinge.
9 Reinsert the plastic plugs on
the sid e from which the door
was removed.
11