Filter
Top Products
21
Consumer Support
Troubleshooting TipsOperating Instructions
Safety Instructions
Installation Instructions
Error Code, Error Possible Causes What To Do
4 beeps, Dryer ran Lint filter blocked, ventilation • Remove lint; wash the lint filter to remove softener sheet
too long system clogged or dryer residue. Clean out the ventilation system. Reduce load
overloaded size.
6 beeps, Push button does Push button held too long or • Press buttons lightly and release. Disengage the button.
not function wedged in the control panel
Error Codes
If the dryer stops, the status lights flash and the signal beeps, an error has occurred. Press PAUSE/CANCEL. Consult the
Error Code Chart below for the possible cause and solution. Make the correction, select a cycle and press START. If the
dryer stops, status lights flash again and the beeping continues, please contact service for assistance.