The Problem
Solver
(continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
WWNKLING IN
●
Accumulation of lime scale due to use of carbonate detergents. If you must use a
PERMANENT PRESS
non-phosphate detergent, avoid the use of a high-carbonate detergent.
AND “NO-IRON”
ITEMS (continued)
c
Failure to use fabric softener. Proper use of fabric softener will minimize
wrin~ing.
To remove wrinkles:
●
Retumble on “Permanent Press” setting.
●
Rerinse and dry on “Permanent Press” setting.
. If unsuccessful,
retumble on normal temperature for 10-12 minutes and hang
immediately.
●
Iron carefully.
. Send to dry cleaners for pressing.
●
Some
wrinHes
may remain which cannot be removed;
*NOTE
:
If you
follow
good
laundry procedures and Permanent Press clothes
still
come
out
wrin~ed,
the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE Answer Center”
800.626.2000
consumer information service
12