GE 840173100 Iron User Manual


 
6
Automatic Shutoff Status Indicator
If the iron is an Automatic Shutoff model, the light comes on when iron is first plugged in.
After 1 hour the iron will shutoff and the light will go out.
Press the Temperature Selector to turn the iron back on for
another hour of ironing.
Quick Off
Press and hold the Temperature Selector for three seconds to turn the iron off quickly.
Retractable Cord
1. Pull cord to desired length. Do not
unwind cord beyond colored tape
indicator on cord.
FEATURES
(cont.)
Auto Shutoff
Status
Indicator
Vertical Steam
1. Follow Steps 1 through 3 in “To Steam Iron.”
2. Hang garment in a location that is not susceptible to damage
from heat or moisture. Do not hang in front of wallpaper,
window, or mirror.
3. Hold iron about 6 inches away from garment. Press and
release Blast Button to steam out wrinkles. Do not press Blast
Button more than once every 2 seconds.
4. To turn iron off, turn Adjustable Steam to Dry Iron. Set Fabric
Setting Indicator to OFF
(O). Unplug iron.
5. Empty water from iron following directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to touch delicate garments.
Temperature
Selector
2. To store cord, press and hold Cord
Release Button while guiding cord into
storage area. CAUTION: Hold plug while
retracting cord.
Do not let cord
retract freely. Cord
may jam on reel or
loose cord may whip
back and forth and
could cause injury.
840173100 Ev02 12/11/07 1:11 PM Page 6