GE 840165700 Iron User Manual


 
4
1. Unplug iron. Turn Adjustable Steam Switch to Dry Iron O. Set iron upright on heel rest.
2. Using a cup, slowly pour tap water into water tank opening until MAX fill line has
been reached. Do not fill iron directly from the faucet.
3. Plug iron into outlet.
4. Turn
the Temperature
Control Dial to desired fabric setting in the steam range.
5. Allow two minutes for the iron to reach desired temperature.
6. Set Adjustable Steam Switch to the recommended steam level. See the “Fabric
Setting Chart.”
7. To turn iron off, set Adjustable Steam Switch to Dry Iron O. Turn the Temperature
Control Dial to OFF ( O). Unplug iron.
8. Empty water from the iron following directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between
tap water and distilled water for use in the iron.
1. Plug iron into outlet.
2. Turn Adjustable Steam Switch to Dry Iron O.
3. Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to
reach desired temperature.
4. To turn iron OFF (O), turn Temperature Control Dial to OFF (O) and unplug iron.
Ironing Instructions
Dry iron using spray if necessary.
Dry iron on the wrong side of the fabric.
Iron while fabric is still damp.
Use a press cloth and steam iron on the
wrong side of fabric.
Iron using spray if necessary.
For cotton, iron while still damp or use spray.
For linen, iron fabric on wrong side.
Temperature Setting
Off
Nylon,
Acrylic
Silk
Polyester
Wool
Rayon
Cotton,
Linen
Dry Iron
Steam Range
Steam
Setting
••
••
•••
•••
O
TO DRY IRON
TO STEAM IRON
FABRIC SETTING CHART
840165700 Ev02 5/1/07 4:05 PM Page 4