Filter
Top Products
7
Self-Clean
To keep the steam vents clear of any
build-up, follow these instructions each
time you iron using steam.
1. Set Fabric Setting Indicator to OFF/0
and set Adjustable Steam to Dry Iron
position. Fill iron with water to
1
⁄2 of its maximum capacity.
2. Set Fabric Setting Indicator to Linen
setting and let iron heat until the
indicator box around the selected
fabric stops blinking. Keep Adjustable
Steam set on Dry Iron .
3. Set Fabric Setting Indicator to OFF/0.
Unplug iron and hold over a sink
with soleplate facing down.
4. Turn Adjustable Steam to Steam
position. Press and hold the Self Clean
Button. Boiling water and steam will
flow out of steam vents. Allow all water
to drain from iron.
5. Gently move iron front to back to
allow water to clean entire soleplate
area.
6. If water still remains inside of sole-
plate, reheat iron as indicated in Step
2. Boiling water and steam could still
flow out of steam vents.
Caring for Your Iron
(continued)
840136200 Ev02 6/29/05 9:55 AM Page 7