Filter
Top Products
1. Unplug iron. Using a cup, slowly
pour 6 ounces
(
3
⁄4 cup) of tap
water into water
tank opening.
Do not fill iron
directly from
the faucet.
2. Plug iron into outlet.
3. Turn
the Temperature
Control Dial
to desired fabric
setting in the
steam range. Set
the Adjustable
Steam Switch to
the recommended
steam level. See
“Fabric Setting
Chart” on page 5.
To Steam Iron
Opening
4. Allow two minutes for the iron to
reach desired temperature.
5. To turn iron off, set Adjustable Steam
Switch to 0 (Dry Iron). Turn the
Temperature Control Dial to Off
( O). Unplug iron.
6. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
4
To Dry Iron
3. Turn Temperature Control Dial
to desired
temperature.
Allow two
minutes for iron
to reach desired
temperature.
4. To turn iron Off, turn Temperature
Control Dial to Off ( O) and unplug
iron.
1. Plug iron into outlet.
2. Set the Adjustable Steam Switch
to 0 (the Dry
Iron position).
Using Your Iron
840099800 Ev02 4/9/02 2:05 PM Page 4