Filter
Top Products
7
About the dryer control panel.
Power
Press to “wake up” the display. If the display is active, press to put the dryer in the standby mode.
NOTE: Pressing POWER does not disconnect the appliance from the power supply.
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
Sensor Cycles Description
COTTONS
For cottons and most linens.
NORMAL/MIXED LOADS
For loads consisting of cottons and poly-blends.
EASY CARE
For wrinkle-free and permanent press items.
ACTIVE WEAR
Clothing worn for active sports exercise and some casual wear. Fabrics include new
technology finishes and stretch fibers such as Spandex.
DELICATES
For lingerie and special-care fabrics.
SPEED DRY
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be
used if the previous cycle left some items damp, such as collars or waistbands.
1
2
Timed Dry Cycles Description
WARM UP
Provides 10 minutes of warming time to warm up clothes.
AIR FLUFF
Use this feature to tumble items without heat.
DEWRINKLE
(on some models)
For removing wrinkles from items that are dry or slightly damp. This cycle is not
recommended for delicate fabrics.
STEAM REFRESH
(on some models)
For slightly wrinkled dry garments. Significantly reduces wrinkles on up to 5 garments. After
the STEAM REFRESH Cycle, the unit will beep and display “0:00.” If the unit is not turned off
or if the door is not opened, the dryer will continue to tumble for 30 minutes. At the end of 30
minutes, it will display “0:00” and the cycle will be complete.
Note: A single extremely light fabric item may need to have an additional item included in the
STEAM REFRESH cycle to achieve optimum results.
STEAM DEWRINKLE
(on some models)
For use with larger loads than STEAM REFRESH. Ideal for loads left in dryer for an extended
time.
My Cycle Description
MY CYCLE
Press to use, create or modify custom dry cycles. (See page 8 for more details)
Timed Dry
Use to set your own dry time. TIMED DRY is also recommended for small loads
To use TIMED DRY:
1. Turn dry cycle dial to TIMED DRY.
2. Increase the drying time by pressing the TIMEDRY ADJUST
+
button.
Note: This button only increases the time. When max time is reached, pressing the button again will reset the counter to
the lowest setting.
3. Select the TEMP.
4. Close the door.
5. Press Start
3
GEAppliances.com