GE 169073 Iron User Manual


 
5
Spray and Blast of Steam Buttons – Push
Blast Button for an
extra blast of steam.
Push Spray Button
to release a fine
spray
of water for
difficult
wrinkles in
cotton or linen.
Automatic Shutoff Reset Button and Light –
The light comes on
when the iron is
first plugged in.
After one hour, the
iron will shut off
and the light will
go out. Push the
Reset Button to
turn iron back on.
Power On Light – This light comes on
when the iron
is plugged in
and remains on
until the iron is
unplugged. The
light stays on even
if Temperature
Control Dial is
turned to Off ( O).
Adjustable Steam Switch – This switch
provides
minimum
steam for wool
or maximum
steam for linen.
Set the switch to
0 to
change to
Dry Iron.
Power
Light
Reset
Button
Optional Features
(on selected models)
Blast Spray
Light
Fabric Setting Chart
Ironing Instructions
Dry iron using spray if necessary.
Dry iron on the wrong side of the fabric.
Use a press cloth and steam iron on the
wrong side of fabric.
Iron while fabric is still damp.
Iron using spray if necessary.
For cotton, iron while still damp or use
spray. For linen, iron fabric on wrong side.
Temperature Setting
O Off
1 Nylon, Acrylic
2 Silk
3 Wool
4 Polyester
5 Rayon
6 Cotton, Linen
Steam Setting
Steam Range
Dry Iron
840099800 Ev02 4/9/02 2:05 PM Page 5