Filter
Top Products
6
Setting the temperature
• When pressing the Fabric Selector, the temperature setting will cycle in the
following sequence:
STAND BY→ RAYON → SILK → WOOL → COTTON → LINEN→STAND BY
Setting Temp. Range LCD display action
Full display at
initial stage
Power lamp will light and
the system resets with
LCD background ON and
flashing once. Then the
buzzer beeps once and it
goes to the stand by
condition with the Sleep
Indication Lamp flashing
blue.
Stand by
condition
Hold Button for 3 Seconds
to turn to Stand by.
Background lamp turns
off; the LCD will read
“STAND BY” and Sleep
Indication Lamp will flash
blue. Under this
condition, the relay has
no output. If pressing on
setting button, the system
now goes to the ready
operation status.
RAYON 195 – 250ºF Push button once: RAYON
blinks until heat is
reached and is ready to
iron.
SILK 250-285ºF Push button twice: SILK
blinks until heat is
reached and is ready to
iron
WOOL 285-320ºF Push button 3 times:
WOOL blinks until heat is
reached and is ready to
iron
COTTON 320-355ºF Push button 4 times:
COTTON blinks until heat
is reached and is ready to
iron.
LINEN 355-410ºF Push button 5 times:
LINEN blinks until heat is
reached and is ready to
iron