Filter
Top Products
Laundry Center Features
SELF-CLEANING
LINT FILTER
SAFETY LID
LOCK
MODEL-SERIAL
NUMBER PLATE
BLEACH
DISPENSER
LINT
FILTER
OPENING
DRYING
RACK
SAFETY
DOOR
SWITCH
DYNAMIC
BALANCE
SYSTEM
CONVENIENCE
HANGER
FABRIC
SOFTENER
DISPENSER
Automatic Whites Cycle
This cycle is best for cotton items that can be
tumble dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle
is best for items of similar fabric, weight and
construction.
• For items requiring more drying time, set cycle
selector on MORE DRY.
• For items requiring less drying time, set cycle
selector on LESS DRY.
Timed Dry Cycle
This cycle provides up to 70 minutes of drying
time at the temperature selection of your choice.
Energy Saving Tips
• Keep the lint screen clean and exhaust the
dryer correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose an
automatic dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a
partially dry load, and overdrying.
• Dry one load after another to take advantage
of a warm dryer.
• Opening the door needlessly causes warm air
to escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
P/N 134818800 (0611)
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The
heat automatically turns off and the load continues
to tumble for 5-10 minutes. This reduces wrinkling
and makes items easier to handle during
unloading.
Drying time varies depending on size and dampness
of load, weight and fabric type. Room temperature
and humidity, type of installation and electrical
voltage or gas pressure can also affect drying
time.
Automatic Colors Cycle
This cycle is best for permanent press, knit and
delicate items. Drying time is determined
automatically at the temperature selection of
your choice.
• Medium heat is suggested for permanent press
items.
• Low heat is suggested for knit and delicate
items.
If the dried load cannot be removed promptly, the
cycle selector will advance to the Press Saver
setting. Unheated tumbling continues during Press
Saver for 40 minutes to help reduce wrinkling.
The cycle signal will sound briefly every 5 minutes
as a reminder to remove the load. If the load is
removed before time has elapsed, turn the cycle
selector knob to Off.
Note: Use the Automatic Whites cycle if you do
not want to hear the cycle signal during
Press Saver.