Filter
Top Products
12
OPERATING INSTRUCTIONS
line dry
Select this option to simulate hanging your laundry in
a summer breeze combined with the wrinkle-releasing
benefi ts of tumble action. Since drying times are
calculated with the dryer’s automatic moisture sensors
and heat is radically reduced or eliminated, cycle time
will be lengthened. As a result, depending on moisture
content of load, overall energy consumption decreases.
Available on mixed load, normal, casual, and
delicates.
delay start
Press delay start to select a drying time convenient
to your schedule or during off peak energy hours.
The delay time selected will be displayed and begin
counting down when you select START.
Cycle Options
To add options, press the corresponding options buttons
to illuminate the selections desired. To delete options,
press the options buttons again and the indicator lights
will turn off. Some options require a “Press & Hold” effort
to activate or deactivate the secondary function.
Not all options are available on every model. To protect
your fabrics, not all options are available with every cycle.
If an option is not appropriate for the cycle, the indicator
will not light. Occasionally, a setting and option in the
same cycle will confl ict with each other, like sanitize
temp and damp dry level. When this happens, the option
selected fi rst will cause the confl icting option to not be
selectable.
allergy (on select models)
Use this option to reduce allergens as you dry your load.
Not recommended for items prone to heat damage.
energy saver
The energy saver option reduces the drying
temperature a few degrees to save energy. In conjunction
with automatic moisture sensors, cycle times will increase
slightly, but overall energy usage will decrease.
add steam
The add steam option injects steam into the clothing
prior to cool down to reduce wrinkling.
wrinkle release
Select wrinkle release if the dried load might not
be removed promptly at the end of the cycle. The dry
load will continue tumbling without heat to help reduce
wrinkling. When chime is selected, a beep will be
heard periodically. The load may be removed any time
during wrinkle release.
Í
NOTE
To change the options after the cycle starts, press pause,
adjust the setting and press START to resume the cycle.
Í
NOTE
While counting down during delay start, you will notice
your dryer periodically tumbling for a few minutes without
heat to redistribute the load, maximizing load freshness.
chime (press & hold)
A signal will sound at the end of the cycle (and periodically
during wrinkle release) if this option is selected.
anti static
The anti static option injects steam into the clothing
just before cycle completion to reduce static.
shrink guard (on select models)
Select shrink guard to lower the initial drying
temperature to protect fabrics from overdrying.
control lock
To lock the controls between cycles, press and hold the
control lock button for 5 seconds. Repeat to unlock
the controls when you are ready to operate the dryer.
Use this feature to reduce the likelihood of accidental
operation by children.