Filter
Top Products
20
OPERATING INSTRUCTIONS
Clean Washer Cycle
Turn cycle selector to Rinse & Spin
and then press Clean Washer button
to enter Clean Washer cycle.
REMOVE “LIQUID ONLY”
DISPENSER CUP
“MAIN WASH”
COMPARTMENT
Í
NOTE
If the Clean Washer cycle is cancelled or paused
during the cycle, the washer will go through 2 rinse
cycles to clean the drum of any residual bleach before
unlocking the door.
Í
NOTE
The washer will automatically prompt you to run the
Clean Washer cycle every 50 cycles. You may press
the Cancel button to manually perform the cycle at
another time.
IMPORTANT
Items left in washer while performing the Clean
Washer cycle will cause a severe out-of-balance
situation that could damage the washing machine.
TO REFRESH OR CLEAN INSIDE OF WASHER
To clean and freshen the washer, perform the Clean
Washer cycle. For best results use the Clean Washer
cycle once a month. To begin the cycle, press Select
when prompted during automated reminder mode or
manually select the cycle by following these directions:
Rotate cycle knob to Rinse & Spin (or Spin Only, if
your models does not have Rinse & Spin cycle). Then
press the Clean Washer option button. The LCD screen
will display “SYSTEM CLEAN”.
If installed, remove the “MAIN WASH - LIQUID ONLY”
cup from the dispenser. REMOVE ALL ITEMS FROM
WASH DRUM before fi lling the detergent chamber with
one (1) cup of liquid chlorine bleach OR one (1) pouch of
TIDE
®
WASHING MACHINE CLEANER. DO NOT use both.
Press Start to begin.
Immediately follow up with a Spin Only
cycle. Select Extra Rinse on Max Spin
Speed with no detergent or bleach to
help clear any residual bleach left after
the Clean Washer cycle.
For best results
WARNING
HARMFUL VAPOR HAZARD
Do not use or mix liquid chlorine bleach with other
household chemicals such as toilet cleaners, rust
removers, acid or products containing ammonia. These
mixtures can produce dangerous fumes which can
cause serious injury or death.