Filter
Top Products
18
OPERATING INSTRUCTIONS
Pre Wash
Select this option to add a short initial wash period to
a cycle. Heavily soiled and stained loads will prewash
for approximately 5 minutes. The water will drain and
the load will automatically advance to the regular wash
cycle.
See step 5 in “Operating Your Washer” section in this
guide for details on adding detergent to the dispenser.
Chime (Press & Hold)
A signal will sound at the end of the cycle if this option
is selected.
Delay Start
Press Delay Start to select a wash time convenient
to your schedule or during off peak energy hours.
The delay time selected will be displayed and begin
counting down when you select Start.
Max Fill (Press & Hold)
Increase the water fi ll level of the agitation portion of
any wash cycle.
Freshwater Rinse
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended
for heavily soiled loads or if household members have
sensitive skin.
Clean Washer
To clean and freshen the washer, perform the Clean
Washer cycle. If you wish to begin the cycle, press
select when prompted. This maintenance cycle uses hot
water and two rinses to remove residue that may cause
odor. See “Inside Routine Cleaning (Preventative)” for
detailed information about the Clean Washer cycle.
Cycle Options, continued
Í
NOTE
The washer will automatically prompt you to run the
Clean Washer cycle every 50 cycles. You may press
the Cancel button to manually perform the cycle at
another time.
Control Lock
To lock the controls between cycles, press and hold the
Control Lock button for 5 seconds. Repeat to unlock
the controls when you are ready to operate the washer.
Use this feature to reduce the likelihood of accidental
operation by children.