Filter
Top Products
P/N 131838700 (9902)
Cycle Selection (continued)
Time Dry Regular-High Heat
This cycle provides up to 100 minutes of drying
time at high heat for regular items. It is followed
by a 10-minute Cool Down (no heat) setting.
When drying permanent press items, turn the
cycle selector to 40-50 minutes. This is the
average time needed to dry most loads of
permanent press items.
The Cool Down setting within the Time Dry
cycle provides up to 10 minutes of tumbling
without heat. Use Cool Down to freshen clothing,
pillows or blankets or to dust draperies. Heat-
sensitive items such as plastics, foam rubber or
similarly textured rubber-like materials or items
containing feathers or down should be dried
only with the Cool Down setting.
When the items are dry, the heat automatically
turns off and the load is tumbled for approximately
10 minutes without heat.
To avoid fire hazard, do not use
heat to dry items containing feathers or down,
foam rubber, plastics, or similarly textured,
rubber-like materials. Use Cool Down (no heat)
setting only.
Auto Dry Regular-High Heat
This cycle is best for regular and permanent
press items that can be tumble dried at high
heat. Drying time is determined automatically.
• For items requiring more drying time, set cycle
selector on MORE DRY.
• For items requiring less drying time, set cycle
selector on LESS DRY.
Energy Saving Tips
• Keep the lint screen clean and exhaust the
dryer correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose an
automatic dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a
partially dry load, and overdrying.
• Dry one load after another to take advantage
of a warm dryer.
• Opening the door needlessly causes warm air
to escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).