Fisher & Paykel WH8060P Washer User Manual


 
26
All wash cycles default to the recommended options for that cycle based on the average
expected load to be washed. You can vary the options (eg ‘Wash Temp’, ‘Spin Speed’)
to create your desired cycle. Note: some options are not available on some cycles, for
clothes care reasons, or because the option is not appropriate for the cycle.
To change a wash option or options you have selected after a cycle has started, touch
and select your new setting, then touch again to resume the cycle with the new
setting or settings. Note: some options may not be available for selection under certain
conditions and after particular stages of the cycle have passed.
Wash Temp
Your washer offers five wash temperatures:
Cold 30°C 40°C 60°C 90°C
Simply touch the ‘Wash Temp’ button to increase or decrease the wash temperature.
The washer will fill with both hot and cold water to achieve the selected wash
temperature. If required the washer will heat the water to the selected temperature.
Some temperatures are not available on some cycles as a safeguard for your clothes
(eg60°C and 90°C on the ‘Handwash’ cycle).
ImpORTANT!
When 90°C temperature is selected, the door glass will become hot. Do not touch the
glass part of the door. Keep children away from the washer.
Spin Speed
Your WH7060P or WH8060P model of washer offers four spin speeds: 500rpm,
800rpm, 1100rpm and 1400rpm, plus an additional ‘No Spin’ option.
Your WH7060J or WH8060J model of washer offers three spin speeds: 500rpm,
800rpm, 1200rpm, plus an additional ‘No Spin’ option.
Simply increase or decrease the spin speed by touching the ‘Spin Speed’ button.
Selecting ‘No Spin’ will end the cycle after the rinse, allowing you to remove items you
wish to drip dry. Note: the washer will complete the default wash and rinse spins for
the cycle; only the final spin will not be completed. If you have removed the items you
wish to drip dry and there are items remaining that you would like to proceed to spin,
press and select the ‘Spin’ cycle. If necessary, modify the spin speed to best care for
your load (ie spin delicate items at 500rpm for best garment care).
Soil Level (WH7060P and WH8060P models only)
The ‘Soil Level’ option lets you adjust the wash to suit the amount of soil in your load.
For example, select ‘Heavy’ for dirty clothes; for items that are only lightly soiled, select
‘Light’. This adjusts the wash time accordingly to give the load the right amount of
agitation to remove the soil.
WASH CYCLE OPTIONS