Fisher & Paykel NZ AU Clothes Dryer User Manual


 
5
Important!
The dryer must be installed in a suitable location.
Do not install the dryer behind a lockable door, sliding door, or
behind a door where the hinge is on the opposite side to that of the
dryer door. Ensure the dryer door can always be opened fully.
There are several different ways you can install your dryer.
1. Free standing
The dryer stands on the floor and can easily be
moved into position.
2. Plinth*
Electronic and Auto-timer 4.5 kg only
A plinth, with adjustable feet, allows the dryer to be:
– matched in height to your washer.
– installed under a bench.
Plinths can be purchased from your dealer.
115 mm Plinth Part No. 94832
60 mm Plinth Part No. 94852
3. Upright wall mounting*
All models
The wall mounting kit allows the dryer to be
installed at any desired height minimising the
amount of bending and stretching.
Wall Mounting Kit Part No. 502067
4. Inverted wall mounting*
All models
A wall mounting kit and inverted panel allows you
to install the dryer above the washer or tub.
Electronic Inverted Panel Part No. 427776
Wall Mounting Kit Part No. 502067
* Contact your dealer for assistance with plinths,
inversion kits and wall mounting kits
** Washer sizes. Compact: 560 x 560 mm,
Medium: 600 x 600 mm, Large: 650 x 650 mm.
Minimum
lid clearance
Min. clearance
for dryer = 860 mm
Installation options
Fig. 1 Free standing
115 mm
Fig. 2 Plinth height
Fig. 3 Upright wall
mounting
Fig. 4 Inverted wall mounting
Washer**
Compact = 435 mm
Medium = 475 mm
Large = 525 mm