Filter
Top Products
31
Saving Water
Full loads are more efficient than part loads.
Use the Water Saver or Eco option. (Refer to page 16).
Adjust the rinse option on Regular, Heavy Duty and Wool cycles
to one deep rinse. (Refer to page 26).
Adjust Auto Water Level to fill with less water. (Refer to page 27).
Recycling the Wash Water
Models Only
Your Smart Drive® also offers several ways of reusing the wash and rinse water.
1
Select SOAK on the first wash cycle.
2
Remove the clothes at the end of the wash phase and add the second load to the wash water.
3
Select the wash cycle for the second load. You may need to add extra detergent.
4
Remove the second load at the end of the cycle.
5
Replace the first load, select rinse and complete the cycle.
Recycling the Water From Deep Rinse
1
Select SPIN HOLD on the first wash cycle. (You cannot use the Water Saver or Eco option when
recycling the water from deep rinse).
2
Remove the clothes at the end of the rinse and add the second load to the rinse water.
3
Select the wash cycle for the second load.
4
Remove the second load at the end of the cycle.
5
Replace the first load and spin dry.