Filter
Top Products
22
6
LOCKING AND OPENING THE DOOR
operating the machine and useful tips
Lock selection
The lock is used to prevent handling of the
various buttons from affecting the wash cycle.
It’s used to prevent children from touching the
buttons, etc.
Enabling the lock
a Enable the lock by pressing and holding
the Start/Pause button for 2 seconds.
A visual confirmation appears on the
display.
Disabling the lock
b The lock is disabled when the wash
cycle ends.
If you wish to disable the lock without
waiting for the cycle to end, press and
hold the Start/Pause button again for 2
seconds. After 2 seconds have elapsed,
the lock mark no longer appears on the
display and remains paused.
LOCKING
a The symbol is always visible when
the door is closed and locked, and does
not appear when the door is open. The
door opens automatically when the
button is pressed.
b If you are not able to open the door due
to a malfunction or a power outage, do
the following: remove the dispenser by
pulling out the handle and pushing the
blue lever with your finger. You will be
able to see a slotted button at the right.
Using a coin, turn the button to the left
and the door will open.
OPENING
THE DOOR