Filter
Top Products
Before Using
Before Using
Installation and adjustment
Install the water inlet hose; Select the water level
Page8
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
to needed line.
Insert the water inlet hose into the water-filling
entrance on the control pane directly.(pull it
out to dismantle it)The appliance is to be connected
to the water mains using new hose-sets and that
old hose-sets should not be reused.
Water inlet hose
Water inlet
Maximum
Max.
Minimum
Min
Medium
Med
Water level
indicator
about 55L
about 46L
about 36L
Install the lint filter
After opening the package,please take out the
lint filter from the document bag,install it
to the overflow filter of the cabinet.
See to the figure
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Overflow filter
Lint filter
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 1.2m , or the drainage will
not be smooth enough and cause incomplete drainage.
2.Do not step on or press the drain hose.
<1.2m