Electrolux WA SL2 E 102 Washer User Manual


 
Problem Possible cause/Solution
The washing machine does not start:
The door has not been closed.
Close the door firmly.
The plug is not properly inserted in the power
socket.
Insert the plug into the power socket.
There is no power at the socket.
Please check your domestic electrical installa-
tion.
The main fuse has blown.
Replace the fuse.
The selector dial is not correctly positioned and
the button 7 has not been depressed.
Please turn the selector dial and press the but-
ton 7 again.
The delay start has been selected.
If the laundry is to be washed immediately,
cancel the delay start.
The Child Safety lock has been activated.
Deactivate this device.
The machine does not fill:
The water tap is closed.
Open the water tap.
The inlet hose is squashed or kinked.
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter
are blocked .
Clean the water inlet filters (see "Cleaning the
water inlet filters" for more details) .
The door is not properly closed.
Close the door firmly .
The machine fills then empties immediately:
The end of the drain hose is too low.
Refer to relevant paragraph in «Water drain-
age» section.
The machine does not empty and/or does
not spin:
The drain hose is squashed or kinked.
Check the drain hose connection.
The drain filter is clogged.
Clean the drain filter.
An option or a programme that ends with the wa-
ter still in the tub or a that eliminates all the spin-
ning phases has been selected.
Select the draining or the spinning programme.
The laundry is not evenly distributed in the drum.
Redistribute the laundry.
electrolux 49