Filter
Top Products
13
Error codes
A fault in the program or in the machine is indica-
ted by an error message comprising
an error code and a descriptive text.
The drying program and the error code can
be reset before restarting by holding in the knob
for at least 10 seconds or turning off the power to
the machine.
Error codes
1
1
E10
INCORRECT
PROGRAMMING
Code Text Cause/Action
E10 INCORRECT PROGRAMMING Programming error/incorrect or missing parameter(s).
E11 DRYING ERROR WITH RMC
PROGRAM Maximum allowable RMC time exceeded (non-coin
operated models only).
E12 DRYING ERROR WITH
AUTOSTOP PROGRAM Maximum allowable Autostop time exceeded
(non-coin operated models only).
E15 NO VACUUM DETECTED The vacuum switch/pressostat does not shut within
12 seconds after the dryer is started.
For other error messages or repeated error messages, contact service personnel.