Filter
Top Products
Drying
16
0 Press the START/PAUSE button.
0 Press the DELAY TIMER button until the correct delay is displayed.
0 Press the START/PAUSE button again.
The programme will now start straight away or the countdown will
start and the programme will start automatically at the end of the
countdown.
Start the drying programme
0 Press the START button.
The drying programme starts. The programme
progress is indicated on programme phase dis-
play.
Removing laundry or loading laundry when necessary
You can interrupt the drying process at any time to remove some of the
laundry or to add more laundry.
0 Open the door.
1
Caution! The laundry and the drum may be hot.
0 Remove or add more laundry.
0 Close the door.
0 Press the START button to resume the drying
process.
End of the drying process
The cooling phase starts shortly before the end of the drying process:
The heater is switched-off during this phase.
After the cooling phase the END / CREASE GUARD display is illumi-
nated. You can now remove the washing from the tumble dryer.
The crease guard phase follows automatically after the drying process.
The drum rotates intermittently. This keeps your laundry loose and
crease-free.
If you have pressed the AUDIBLE SIGNAL button, an acoustic signal is
sounded intermittently during this phase.
You should remove the washing at the latest towards the end of the
anti-crease phase to avoid creasing.