Filter
Top Products
22
Changing bulb for interior light
Only use a special bulb which is designed specially for dryers. The spe-
cial bulb is available from the local Service Force Centre.
1 Warning! Do not use standard bulbs! These develop too much heat and
may damage the machine!
1 Warning! Before replacing the bulb, disconnect the mains plug; with a
permanent connection: fully remove the fuse.
1. Unscrew the lampcover (this can be found directly behind the loading
aperture, at the top; refer to “Description of machine” section.)
2. Replace defective bulb.
3. Replace the lampcover.
1 Warning! For reasons associated with safety, the lampcover must be
screwed down tightly. If this is not done, the dryer must not be operat-
ed.