Filter
Top Products
Something not working?
26
If after these checks, the tumble dryer still does not work, contact your
local AEG Service Force Centre.
Please note that it will be necessary to provide proof of purchase for
any in-guarantee service calls.
In-guarantee customers should ensure that the above checks have been
made as the engineer will make a charge if the fault is not a mechani-
cal or electrical breakdown.
The drum illumination does
not work
Is the tumble dryer
plugged in
Plug in the tumble dryer
The program selector is in
the OFF position
Turn the program selector
dial to LIGHT
The bulb needs replacing Replace bulb
The drying process takes
unusually long
The condenser unit is
covered with fluff
Clean the condenser unit
Fluff filter is clogged Clean the fluff filter
The door cannot be closed
Fluff filter has not been
inserted correctly and/or
the filter lid not closed
Replace the fluff filter
and ensure the filter lid is
closed
Display EMPTY WATER is lit Condensate container full
Empty the condensate
container
EMPTY WATER indicator illu-
minated, even though the
container has already been
emptied
Foreign bodies, e. g. ani-
mal hairs, can block the
inlet nozzle as well as the
valve on the end of the
EMPTY WATER container
With the container pulled
out, switch on the
appliance momentarily.
The blockage can be
removed from the contai-
ner shaft or the hair clea-
ned out of the valve
Symptom Possible cause Solution