Filter
Top Products
Cleaning and maintenance
29
Cleaning and maintenance
Cleaning the filter area
Important!
A small amount of fluff may reach the area around the
fluff filter. Therefore, you should clean the entire filter area from time
to time, or at least every three months.
Remove the fluff filter.
Hold the filter lid by the top and pull it
forwards until it is released from both
holders.
Remove the fluff from the entire filter area
– preferably with a vacuum cleaner.
Press both pins of the filter lid into the
holders on the door until they click in.
Reinsert the fluff filter.
Press against the filter lid until it clicks
into the lock.
Cleaning the drum
Warning!
Do not clean the stainless steel drum with abrasive deter-
gents or steel wool!
Wipe the inside of the drum and the drum fins with white vinegar to
avoid a build up of residues/deposits effecting the sensors. This is par-
ticularly important if you regulary use fabric conditioning sheets or dry
starched items in the dryer.
Cleaning the panel and operating parts
Warning
!
Do not use household furniture polish or aggressive deter-
gents.
Wipe over the panel and operating parts with a damp cloth.
Only use warm water.