Electrolux W 1250 Washer User Manual


 
Installation and connection instructions
36
Installation and connection instructions
Installation Safety Precautions
When moving do not tilt the washing machine onto its front or onto
its right hand side (viewed from the front). This is to prevent the pos-
sibility of the electronic components becoming wet.
Before installation inspect the machine for transport damage. Do not
connect the appliance if it is damaged - contact your retailer.
Ensure all packaging and transit bolts/bars have been removed, see
„Removal of Transit Packaging“. Failure to remove transit bolts/bars
may cause serious damage to the appliance or property.
Always insert the plug into a correctly installed earthed socket.
Any plumbing work required to install this appliance should be
carried out by a plumber or competent person.
Check that the electricity supply is the same as that indicated on the
appliance´s rating plate.
Any electrical work required to install this appliance should be carried
out by an electrician or competent person.