Filter
Top Products
Installation and connection instructions
41
Levelling the Appliance
Floor unevenness can be compensated for and the height can be cor-
rected with the four adjustable screw feet. The height can be adjusted
in a range of +10 ... -5 mm.
To adjust the feet use the special spanner supplied.
0 1. Slide the special key firmly onto
the hexagon head of the
threaded foot as far as it will go.
2. Adjust the screw feet so that the
appliance is horizontal and stable.
3. Check that the appliance is level
using a spirit level.
Important. Never use strips or
shins of wood or cardboard etc.
To compensate for any uneven-
ness in the floor. Always use the
adjustable feet.