Filter
Top Products
Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the
programme will start at the end of the count-
down.
If the door light beside the START/PAUSE button is red and flashing at
the start of the programme it indicates that the door is open. Close
the door and press the START/PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to modify or cancel the
delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Modify or cancel the delay time: press the START/PAUSE button.
Press the DELAYED START button until the time required appears on
the display, or 0h, if you wish to cancel it. Press the START/ PAUSE
button again.
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.
Display
The time to the end of the programme decreases minute by
minute and appears on the display.
28
How to wash
START/PAUSE
WASH
EXTRA RINSE
RINSES
END
OVERDOSAGE
SPIN
DRYING
PREWASH
132999111.qxd 1/4/02 10:04 AM Pagina 28 (Nero/Process Black pellicola)