Electrolux FWD 1210 Washer/Dryer User Manual


 
22
Symptom
The door will not open
The programme is still running.
The door lock has not yet released.
There is water in tub. The door can not be opened if water is present in
the tub.
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
The machine does not dry or does
not dry properly
The drying time has not been selected
The
RINSE HOLD
option has been selected
The water tap is not turned on
The drain filter is clogged
The machine is overloaded
The selected drying time or sector are not suitable for the laundry
Possible causes
Spinning starts late or the machine
does not spin
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 20 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and reselect the spin programme.
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Centre by telephoning:
0870 5 929929
Your telephone call will be automatically routed to the
Service Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
website at www.serviceforce.co.uk.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Centre you will need to
give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture).
5. The purchase date
For Customer Service in Ireland please contact us at the
address below:
EHP
Long Mile Road
Dublin 12
Republic of Ireland
Tel: +353 (0)1 4090751
In-guarantee customers should ensure that the above
checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical
breakdown. Please note that a valid purchase receipt
or guarantee documentation is required for in-
guarantee service calls.
Mod. ..........
Prod. No. ...........
Ser. No. .........
M
od
. ..........
P
rod
. N
o
. ...........
S
er. N
o
. .........
P0042 BD