Filter
Top Products
28 electrolux care and cleaning
Always keep a rag nearby to dry up
spillage of water when removing the
cover.
• Remove any objects from the pump
impeller by rotating it.
• replace the filter into the pump
paying attention to insert it properly.
When done, screw it firmly
• replace the emergency emptying cap
into the filter cover and fix it firmly
P1228
P1227
P1226
• Close the pump door.
Warning!
When the appliance is in use and
depending on the programme selected
there can be hot water in the pump.
Never remove the pump cover during a
wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When replacing the cover,
ensure it is securely retightened so as
to stop leaks and young children being
able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
P1230
P1228
132972260 EN.qxd 30/03/2007 15.34 Pagina 28