Filter
Top Products
use electrolux 21
Cancelling a programme
Turn the selector dial to “O” and then
in the new selected programme.
Press the Ok button to cancel the
programme which is running.
Now press the Start/Pause button to
start the new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the Start/Pause button. The
corresponding message will appear on
the display.
If the “door” icon and the
message «Door unlocked» e
«Finished» will appear alternately on
the display, the door can be opened.
If the “door” icon and the
message «Door unlocked» will not
appear on the display, this means that
the machine is already heating, that the
water level is above the bottom edge
of the door or that the drum is turning.
In this case the door can not be
opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to «O». After about 3 minutes the door
can be opened (pay attention to the
water level and temperature!).
At the end of the programme
The machine stops automatically.
If the Rinse Hold or Night Cycle
options have been selected, the
Start/Pause light goes off, the icon of
the selected programme and the
message «Finished» appear on the
display and the door remains locked to
indicate that the water must be emptied
out before opening the door.
To empty out the water please read
the steps on the «Rinse hold»
option paragraph.
Turn the programme selector dial to
“O” to switch the machine off. Remove
the laundry from the drum and carefully
check that the drum is empty.
If you do not intend to carry out
another wash, close the water tap.
Leave the door open to prevent the
formation of mildew and unpleasant
smells.
132972250 EN.qxd 13/04/2007 14.13 Pagina 21