Filter
Top Products
use electrolux 13
After the machine has started, only the
running icon stays on. When the
programme has finished, a flashing zero
(0.00) is displayed.
Delayed start
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed.
The delay time value decreases by one
unit every hour and then, when 1 hours
remain, the time decreases every
minute.
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected,
the message Err is displayed for about
2 seconds and the integrated red
Start/Pause light start flashing.
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example
E20 (see paragraph
“Something not working”).
End of programme
When the programme has finished a
flashing zero is displayed, the “door”
pilot light goes off and the door can
be opened.
If your laundry is not removed during 10
minutes after the programme is finished,
the display switches off and the energy
saving system will be enabled.
Only the Start/Pause button pilot light is
flashing to indicate that the appliance
has to be switched off.
Heating phase
During the washing cycle the display
shows a temperature icon to indicate
that the appliance has started the
heating phase of the water in the tub.
Select the Start/Pause
Start/Pause
2.05
132979050.qxd 26/07/2006 11.57 Pagina 13