Filter
Top Products
Measure out the detergent and the fab-
ric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment
or in the appropriate compartment
if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the com-
partment marked
(the amount used must
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automatically
select the maximum spin value provided for
the programme you have chosen. You can
change these values by operating the corre-
sponding buttons. The green pilot light of the
button 8 starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position
, to
switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 8 will blink 3 times
and the message Err is displayed to
indicate a wrong selection. The machine
will not perform the new selected
programme.
Select the temperature by pressing
button 3
By selecting a programme, the appliance
proposes automatically a default tempera-
ture.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temper-
ature.
Reduce the spin speed by pressing
button 4
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 4 repeatedly to change the spin
speed, if you want your laundry to be spun at
a different speed.
Select the available options by pressing
buttons 4, 5 and 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before pressing button 8 .
When these buttons are pressed, the corre-
sponding icons appear on the display. When
they are pressed again, the icons disappear.
If an incorrect option is selected, the integra-
ted red pilot light of the button 8 flashes for
3 times and the Err message appears on the
display for a few seconds.
electrolux 9