Filter
Top Products
14
Operating sequence
Automatic washing and drying
(non-stop programme)
This option is only possible for cottons and
synthetics.
Maximum load:
– cotton, linen 2.5 kg
– synthetics 1.5 kg
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main
wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a
time, shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main wash
compartment .
If you wish to carry out the prewash, pour
detergent into the appropriate compartment
marked .
3. Measure out the additive
If required, pour fabric softener into the
compartment marked without exceeding
the «MAX» mark.
4. Select the desired option
Depress button if you have to wash & dry
cotton items and you wish to rinse the laundry
with more water.
5. Select the temperature
Turn the dial to the required temperature setting.
i
P0876
P0877
P0004
95°
P0880S