Filter
Top Products
13
Care and Cleaning
• Before cleaning the dryer interior, unplug the electrical
power cord to avoid electrical shock hazards.
• Do not use any type spray cleanser when cleaning the dryer
interior. Hazardous fumes or electrical shock could occur.
INSIDE
• Clean the lint filter after every load. Lint build-up on the fil-
ter restricts air flow, which causes longer drying times. The
filter is located at the bottom of the door opening. Remove
by pulling straight up. Remove the lint and replace the filter.
• Occasionally a waxy build-up may form on the lint filter
and/or moisture sensing bars from using dryer-added fabric
softener sheets. To remove this build-up, wash them with
warm, soapy water. Dry the filter thoroughly and replace.
Do not operate the dryer without the lint filter in place.
• If the dryer drum becomes stained from noncolorfast
fabrics, clean the drum with a damp cloth and a mild liquid
household cleanser. Remove cleanser residue before dry-
ing the next load.
• See next page for more information regarding cleaning of the
condenser assembly.
OUTSIDE
• Clean the cabinet with mild soap and water. Never use
harsh, gritty or abrasive cleansers.
• Remove debris and lint from the front of the condenser
door with a vacuum cleaner.
• Remove glue residue from tape or labels with a mixture of
warm water and mild detergent. Or, touch residue with the
sticky side of the tape or label.
• Before moving the dryer, place a strip of cardboard or thin
fiberboard under the front leveling legs to prevent damage
to the floor.
IMPORTANT
Do not store or place laundry products on top of dryer at any
time. They can damage the finish or controls.
IMPORTANT
Clean the lint filter and dump water container after every
load.
WARNING
To reduce risk of fire or serious injury to persons or property,
comply with the basic warnings listed in the Important Safety
Instructions and those listed below.