Filter
Top Products
something not working electrolux 15
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the Start pilot light flashes to indicate that
the machine is not working.Once the problem has been eliminated, press the Start
button to restart the programme. If after all checks, the problem persists, contact
your local Service Centre.
Malfunction Possible cause Solution
Dryer does not work.
● Mains plug is not plugged in
or fuse is not working
correctly.
● Loading door is open.
● Have you pressed the Start
button?
● Plug in at mains socket.
Check fuse in fuse box
(domestic installation).
● Close loading door.
● Press the Start button again.
Drying results
unsatisfactory.
● Wrong programme selected.
● Lint filter clogged.
● Incorrect volume of laundry.
● Ventilation slots in base area
covered up.
●Residue on inside surface of
drum or drum ribs.
● Select a different programme the
next time you dry (see “Overview
of programmes” section).
● Clean lint filter.
● Observe recommended
loading volumes.
● Uncover ventilation slots in
base area.
● Clean inside surface of drum
and drum ribs
.
Loading door does not
close.
● Fine strainer not in place
and/or large mesh filter not
locked in place.
● Install fine strainer and/or
snap large mesh filter into
place.
GB
136904120.qxp 2007-10-02 08:45 Page 15