Filter
Top Products
Select the Delay Start
With the DELAY button, you can delay the start of
a programme by between 30 minutes (30' and a
maximum of 20 hours (20H).
1.Select the programme
2.Press the DELAY button as many times
as necessary until the required start delay appears
on the multi display, e.g. 12H if the programme is
to be started in 12 hours.
If 20H is displayed and you press the button again,
the time delay will be cancelled. The display will show
0' and then the duration of the selected pro-
gramme.
3.To activate the delay timer, press the START/PAUSE
button. The amount of time remaining until the
programme is set to start is continuously dis-
played (e.g. 12H, 11H, 10H, … 30' e+tc).
If you wish to add some laundry while the
machine is performing the countdown, after
having done so and having closed the door,
press START/PAUSE again, in order to allow
the machine to complete the remaining
countdown time.
C
C
h
h
i
i
l
l
d
d
s
s
a
a
f
f
e
e
t
t
y
y
d
d
e
e
v
v
i
i
c
c
e
e
The child lock can be set to prevent a
programme being accidentally started
or a pr
ogramme in operation being
accidentally changed. The child safety
device locks all buttons and the pro-
gramme knob. The child safety device
can be activated or deactivated by
holding down the
“Dryness” and “Long anticrease” (long
anti-crease) buttons simultaneously for
5 seconds.
• Before programme is started:
Appliance cannot be used
• After programme is started:
Programme in operation cannot be
changed
The symbol
Delay
appears in the display to indicate that
the child safety device is activated.
The child safety device is not deactivat-
ed once the programme comes to an
end.
If you want to set a new programme,
you must first deactivate the child safe-
ty device.
Display
The display shows the following information:
D
D
u
u
r
r
a
a
t
t
i
i
o
o
n
n
o
o
f
f
s
s
e
e
l
l
e
e
c
c
t
t
e
e
d
d
p
p
r
r
o
o
g
g
r
r
a
a
m
m
m
m
e
e
After you have selected the programme,
its duration (in hours and minutes) appears
on
the display. It is calculated automatically
on the basis of the maximum load
accepted for each type of fabric and of the
required degree of drying.
When the programme starts, the remaining
time is displayed every 5 minutes.
D
D
e
e
l
l
a
a
y
y
e
e
d
d
s
s
t
t
a
a
r
r
t
t
If you have selected a delay time by means of
the r
elevant button, the display shows it for 3
seconds; then it shows the duration of the
pr
eviously selected programme. The
countdown is displayed every 30 minutes
until it displays “90 minutes” and then hour by
hour.
E
E
n
n
d
d
o
o
f
f
p
p
r
r
o
o
g
g
r
r
a
a
m
m
m
m
e
e
A flashing zero indicates the end of the
programme and it is displayed after the
“a
nticreasing” phase.
3
1.20
use electrolux 11
GB