Filter
Top Products
8. Replace heat exchanger and lock into
place (turn both lock washers outwards
until they snap into place).
9. Close door in plinth.
The appliance will not operate if the
HEAT EXCHANGER indicator is still lit.
Caution! Never operate the dryer
without the heat exchanger.
Cleaning the drum
Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside
of the drum. The degree to which the
laundry has been dried is then no longer
detected reliably. The laundry is damper
than expected when removed from the
appliance.
Use a standard domestic cleaner (e.g. vine-
gar-based cleaner) to wipe down the inside
of the drum and drum ribs.
Clean control panel and housing
Caution! Do not use furniture cleaners
or aggressive cleaning agents to clean
the machine.
Use a damp cloth to wipe down the control
panel and housing.
What to do if ...
Troubleshooting by yourself
If, during operation, the error code E... plus
number or letter) appears on the multi-dis-
play: Switch the appliance off and on again.
Reset programme. Press the START/PAUZE
(START/PAUSE) button. If the error appears
again, please contact the Customer Care
Department, stating the error code
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or fuse
is not working correctly.
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Loading door is open. Close loading door.
Have you pressed the START/
PAUZE (START/PAUSE) button?
Press the START/PAUZE (START/
PAUSE) button again.
Drying results unsatisfac-
tory.
Wrong programme selected.
Select a different programme the
next time you dry (see “Programme
overview” chapter).
Lint filters clogged. Clean lint filters.
Fluff filter clogged. Clean fluff filter.
Heat exchanger clogged with lint. Clean heat exchanger.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots in base area cov-
ered up.
Uncover ventilation slots in base
area.
Residue on inside surface of drum
or drum ribs.
Clean inside surface of drum and
drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine.
Re-programme standard setting for
degree of drying (see ‘Program-
ming options’ chapter).
When a button is pressed
- no reaction of the ma-
chine.
Drying protection. After the start of
the programme, the option can no
longer be set.
Turn the programme knob to O
off . Set the programme again.
Drum light does not work.
Programme selector in O off posi-
tion.
Turn programme selector to any
programme.
electrolux 13