Filter
Top Products
11
The door can only be opened after the relevant pilot light
on the control panel has gone out.
Release of the lock is also indicated by the coming on of
the “end” light and the extinction the “door” light.
Turn the programme selector dial to “O” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
7
. Start the programme
Before starting up the machine check that:
●
the appliance is plugged in
●
the water supply tap is turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
To start the selected programme, press the “start pause”
button; the corresponding light stops flashing.
Only the “wash” pilot light stays on.
The “door” light comes on to indicate that the door is
locked.
The machine starts operating.
8. At the end of the
programme
The machine stops automatically.
If the “rinse hold” option has been selected, the phase
lights “end” and the “door’ light illuminate, the “start
pause” light goes off and the door remains locked to
indicate that the water must be emptied out before
opening the door.
To do this first turn the programme selector dial to “O”
and then to drain programme 14 or spin programme
15
.
In this case reduce the spin speed by means of the
relevant button to adapt it to the fabrics to be spun.
start
pause
132986851.qxd 16/01/2006 08:53 Pagina 11