Filter
Top Products
22
Changing the Memory
1.Put together the new programme combination as required (for an ex-
ample, see “Setting the Memory”, steps 1 to 4).
2.Press the OPTIONS key repeatedly, until the SETUP symbol flashes.
3.Press the OK key.
4.Using the OPTIONS key select the memory position to be changed, e. g.
MEMORY 1.
5.Store the new programme combination using the OK key.
SOUND
The volume of the acoustic signal can be selected.
1.Turn the programme knob to any programme and press the OPTIONS
key repeatedly until the SETUP symbol flashes.
2.Press the OK key.
3.Press the OPTIONS key repeatedly, until the display shows SOUND.
4.Press the OK key.
5.Press the OPTIONS key re-
peatedly until the desired
volume (NORMAL, LOW, NO
SOUND) is shown in the dis-
play.
6.Press the OK key to confirm
the setting. The icon changes
to the next special function.
7.Press the OPTIONS key repeatedly until the exit icon is displayed.
Sound
NORMAL
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. RPM OPTIONS OK TIME