Filter
Top Products
Installation and connection instructions
37
INSTALLATION AND CONNECTION
INSTRUCTIONS
Installation Safety Precautions
• When moving do not tilt the washing machine onto its front or onto
its right hand side (viewed from the front). This is to prevent the pos-
sibility of the electronic components becoming wet.
• Before installation inspect the machine for transport damage. Do not
connect the appliance if it is damaged - contact your retailer.
• Ensure all packaging and transit bolts/bars have been removed, see
„Removal of Transit Packaging“. Failure to remove transit bolts/bars
may cause serious damage to the appliance or property.
• Always insert the plug into a correctly installed earthed socket.
• Any plumbing work required to install this appliance should be
carried out by a plumber or competent person.
• Check that the electricity supply is the same as that indicated on the
appliance´s rating plate.
• Any electrical work required to install this appliance should be carried
out by an electrician or competent person.