Filter
Top Products
26
3 Special spanner A and sealing caps B
(2 units) and C (1 unit) come with
the appliance.
3.Use special spanner A to remove
screw D and the compression spring.
4.Use sealing cap C to cap the hole.
5.Use special spanner A to remove the
two screws E.
6.Use special spanner A to remove the
four screws F.
7.Remove transit bar G.
8.Screw in the four screws F again.
9.Use sealing caps B to cap the two
large holes.
Important: Press all sealing caps B
(2 items) and C (1 item) in firmly so
that they snap into the rear wall.