Filter
Top Products
Instructions for use
34
Power failure during a
wash programme (all
lights have gone out).
Possibly interruption of
power by the power supplier.
(Door remains locked for ap-
prox. 2 minutes for safety
reasons.)
Programme continues, when
the power failure is over.
If the washing is to be re-
moved during the power
failure:
Turn the programme knob to
OFF (ARRET/UIT).
Carry out emergency drain
procedure (see section
"Emergency Drain Proce-
dure").
After approx. 2 minutes, the
door can be opened by pull-
ing on the door handle.
Detergent residues are
accumulating in the
detergent drawer.
The water tap is not turned
on fully.
Turn the water tap on fully.
The filter in the threaded in-
let hose fitting is blocked at
the water tap or at the
washing machine.
Close the water tap. Unscrew
the inlet hose from the water
tap and from the machine.
Clean the filters.
The rinse water is
cloudy.
The probable cause is a de-
tergent high in silicate con-
tent.
This has no adverse effects
on rinse results; if possible,
use liquid detergent.
When pressing an addi-
tional programme
function button, the
corresponding light
does not come on.
The selected additional pro-
gramme function cannot be
combined with the pro-
gramme set.
Select another function.
Problem Possible Cause Remedy